Experimental work | Circuit for IR2111

6:02 AM

IR2111 is a half bridge driver that is extensively used in power electronics.  It is an eight pin ic that works only with half bridge configuration. It can not be used individually for low side or high side driver.  Here is the schematic that i designed during my term project.




Click to zoom 
Following should be kept in mind before executing this circuit.

  1. All grounds common.
  2. All capacitors non polar.
  3. Without connecting pin 6 the ic will not work.

You Might Also Like

0 comments

Copyright statement

Copyright © 2015-2017 by Hadeed A Sher

All rights reserved. No part of this blog may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without my prior written permission. For permission requests, write to the blog author addressed “Attention: Permissions Coordinator,” at the contact form.


Disclaimer

This blog is about my PhD work and an archive to my engineering education. However, additional study material for the courses i teach and that i have studied is also archived here.
All the circuits in this blog are tested by myself under specific conditions. BE CAREFUL if you are experimenting them, the blogger and this blog are not responsible to any harm and or damage to yourself and your equipment.


Contact form

Name

Email *

Message *