I have prepared several simulation tutorials using PSIM. Please feel free to watch them from the links below.
https://www.youtube.com/playlist?list=PL2y_NWJLY67zVjuiiTidMCJ440dH907PW
Lecture 1 | Introduction and ideal switch
Lecture 2 | The Diode
Lecture 3 | The Thyristor
Lecture 4 | Mosfet
Lecture 5 | Composite switches
Lecture 6 | Buck converter
Lecture 7 | Boost converter
Lecture 8 | Buck - boost converter
Lecture 9 | DCM operation
Lecture 10 | Switched capacitor converter
Lecture 11 | Averaged model simulation
Lecture 12 | Flyback converter
Lecture 13 | Forward converter
Lecture 14 | Square wave inverter
Lecture 15 | Quasi square wave inverter
Lecture 16 | Multilevel inverters
Lecture 17 | Single phase PWM inverter
Lecture 18 | Six step 3 phase inverter
Lecture 19 | Three Phase PWM inverter
The following lectures were recorded and uploaded during Spring 22 session
Lecture 20 | SEPIC dc-dc converter
Lecture 21 | CUK dc-dc converter
For worldwide viewers
For viewers in Pakistan
Ok, so the problem is that PSim trail version does not allow you to have more than 1 input and 1 output while yuou perform a co simulation with simulink. The problem is enhaced further by the fact that only 6000 data points can be stored with the trial version. Here is the solution